Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

Soapnuts have been used as a cleaning detergent and medicine since ancient times in different parts of Asia. Today soapnuts are sold as an environmentally friendly alternative to common washing detergents. The aim of this literary study is to give an answer to what it is in the soapnuts that makes them work as a washing detergent. The active component belongs to a group of components called saponins which are secondary metabolites with the purpose to protect the tree from pathogen attacks. Saponins are widely spread in the vegetable kingdom and some of the families and species are so rich in saponins that their names are influenced by this, for example Sapnindaceae and Sapindus which are mentioned in the beginning of this literary study.

Control and comparison of various cleaning methods on restaurants in Södra RoslagenThe purpose of this report is to find out and analyze the efficiency of cleaning methods in restaurant kitchens. The investigation was carried out through unannounced inspections at 89 restaurants in Södra Roslagen (municipality of Danderyd, Täby and Vaxholm). ATP-measuring was done on a plate, a knife, a bench surface and a cutting board. The ATP-method measured the amount of food residue on equipment and working surfaces after cleaning, with a luminometer and swabs. Restaurant staffs were asked to describe in detail how and when the last cleaning was carried out on the surface.

Syftet med denna litteraturstudie var att beskriva varför följsamheten gällande handhygien ofta är låg bland vårdpersonal, samt hur man kan öka följsamheten för handhygien bland vårdpersonal. Metoden som använts var en litteraturstudie. Datainsamling skedde via databaserna Medline (PubMed), Cinahl (EBSCO host) och Academic Search Elite. Sökorden som använts: prevention, hand disinfection, hand washing, infection control, nosocomial infection och education. Totalt användes 15 vetenskapliga artiklar.

ABSTRACTIntroduction: Scientists have over the last centuries realized that presurgical reduction of bacterial skin flora decreases the surgical site infections. Sponges, showers and washing with Chlorhexidine is today a standard procedure. Purpose: The purpose of the study was to describe the patient?s experience of the information given to them about the preoperative showers with hibiscrub. Method: Semi-structured interviews were used to collect the data, and content analysis was used to analys the data.

Syftet med rapporten är att utvärdera och jämföra två standarder, AATCC Test method 198-2011: Horizontal Wicking of Textiles och AATCC Test method 197-2011: Vertical Wicking of Textiles. Standarderna publicerades år 2011 av American Association of Textile Chemists and Colorists. Standarderna mäter wicking, det vill säga, med vilken hastighet som vätska transporteras genom textil, med en horisontell och en vertikal testmetod. Hastigheten anges i olika enheter beroende på standard, enheten för AATCC Test method 197-2011: Vertical Wicking of Textiles är mm/s och AATCC Test method 198-2011: Horizontal Wicking of Textiles anges i mm2/s. Skillnaden i enhet och mätmetod innebär att standarderna inte kan jämföras rakt av genom resultat och mätvärden mellan de båda standarderna.

Every year 67000 tons of food is wasted by Swedish retail stores. The waste implies financial losses for the retailer and it has a huge impact on the global environment. Reducing in-store food waste is thus a win-win situation for both retailers and society. The most effective way to reduce waste is primarily by optimizing the logistics of supply, but customers expect a store with a wide range of products and stuffed shelves. Thus there will always be products about to expire.

This study is a degree project in environmental engineering at Mälardalens university. Its purpose has been to perform a risk assessment on whether or not any contaminations are present in the soil at two properties in Köping. The assessment was to be done accordingly to a method that has been set up by The Swedish Environmental Protection Agency (Naturvårdsverket). The method for investigation of contaminated sites is called MIFO. MIFO consists of two stages.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

This essay is about Abrahams children and its teaching method  the IE- method. The purpose of this essay is to see what four teachers who use the method in their teaching think about it. To get an idea of how these teachers are working with the IE- method, I interviewed them. What are the pros and cons, is it a good way to teach religion? In addition, I look at how the IE- method follows the Lpo94 values and goals.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.